Dear Sir,
Thanks for your reply . I have asked in my location for the chain link mesh . it is 54,000 per ton for 3 inch gap and 10 gauge . For the 35 mm, 6 inch angles of 17 feet it is rs.40 000.
Thanks and regards
Narendra
dbhaduri:
Hello Narendra,
I have gone through your post and also the many replies and suggestions. Firstly, you can use RCC cement poles for chain link fencing as well as MS 35mm angles; MS angles would need a double coat of red oxide paint while the portion that goes for concrete grouting would do with a coat of tar/ bitumen paint.
The chain link can be of 8 or 10 guage thickness as 12 or 14 would be too thin and any cow can damage it easily. Moreover, it is difficult to ensure 100% quality of galvanising unless you get it from TATA steel or JINDAL steel since all local manufacturers adulterate with alumunium nuggets and therefor prone to rusting. The best option would be to buy chain link and apply 2 coats of red oxide paint before fixing. TATA steel chain link is around 80,000/T while other would be available at 50,000/T taking into consideration basic steel price as 35,000/T.
Bhaduri